apiVersion: v1
data:
  daemons: |
    # This file tells the frr package which daemons to start.
    #
    # Sample configurations for these daemons can be found in
    # /usr/share/doc/frr/examples/.
    #
    # ATTENTION:
    #
    # When activating a daemon for the first time, a config file, even if it is
    # empty, has to be present *and* be owned by the user and group "frr", else
    # the daemon will not be started by /etc/init.d/frr. The permissions should
    # be u=rw,g=r,o=.
    # When using "vtysh" such a config file is also needed. It should be owned by
    # group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too.
    #
    # The watchfrr and zebra daemons are always started.
    #
    bgpd=yes
    ospfd=no
    ospf6d=no
    ripd=no
    ripngd=no
    isisd=no
    pimd=no
    ldpd=no
    nhrpd=no
    eigrpd=no
    babeld=no
    sharpd=no
    pbrd=no
    bfdd=yes
    fabricd=no
    vrrpd=no

    #
    # If this option is set the /etc/init.d/frr script automatically loads
    # the config via "vtysh -b" when the servers are started.
    # Check /etc/pam.d/frr if you intend to use "vtysh"!
    #
    vtysh_enable=yes
    zebra_options="  -A 127.0.0.1 -s 90000000"
    bgpd_options="   -A 127.0.0.1  -p 0"
    ospfd_options="  -A 127.0.0.1"
    ospf6d_options=" -A ::1"
    ripd_options="   -A 127.0.0.1"
    ripngd_options=" -A ::1"
    isisd_options="  -A 127.0.0.1"
    pimd_options="   -A 127.0.0.1"
    ldpd_options="   -A 127.0.0.1"
    nhrpd_options="  -A 127.0.0.1"
    eigrpd_options=" -A 127.0.0.1"
    babeld_options=" -A 127.0.0.1"
    sharpd_options=" -A 127.0.0.1"
    pbrd_options="   -A 127.0.0.1"
    staticd_options="-A 127.0.0.1"
    bfdd_options="   -A 127.0.0.1"
    fabricd_options="-A 127.0.0.1"
    vrrpd_options="  -A 127.0.0.1"

    # configuration profile
    #
    #frr_profile="traditional"
    #frr_profile="datacenter"

    #
    # This is the maximum number of FD's that will be available.
    # Upon startup this is read by the control files and ulimit
    # is called. Uncomment and use a reasonable value for your
    # setup if you are expecting a large number of peers in
    # say BGP.
    #MAX_FDS=1024

    # The list of daemons to watch is automatically generated by the init script.
    #watchfrr_options=""

    # for debugging purposes, you can specify a "wrap" command to start instead
    # of starting the daemon directly, e.g. to use valgrind on ospfd:
    #   ospfd_wrap="/usr/bin/valgrind"
    # or you can use "all_wrap" for all daemons, e.g. to use perf record:
    #   all_wrap="/usr/bin/perf record --call-graph -"
    # the normal daemon command is added to this at the end.
  frr.conf: |
    ! This file gets overriden the first time the speaker renders a config.
    ! So anything configured here is only temporary.
    frr version 8.0
    frr defaults traditional
    hostname Router
    line vty
    log file /etc/frr/frr.log informational
  vtysh.conf: |
    service integrated-vtysh-config
kind: ConfigMap
metadata:
  annotations:
    meta.helm.sh/release-name: frr-k8s
    meta.helm.sh/release-namespace: frr-k8s-system
  creationTimestamp: "2026-07-25T20:06:05Z"
  labels:
    app.kubernetes.io/component: frr-k8s
    app.kubernetes.io/instance: frr-k8s
    app.kubernetes.io/managed-by: Helm
    app.kubernetes.io/name: frr-k8s
    app.kubernetes.io/version: v0.0.17
    helm.sh/chart: frr-k8s-0.0.17
  name: frr-k8s-frr-startup
  namespace: frr-k8s-system
  resourceVersion: "4665"
  uid: ad4d6162-8810-4f95-ad53-5c18f6a12b65